CITROEN C6 Technical Information PDF herunterladen (Seite 199)

193

BRAKES

DRAINING, FILLING AND BLEEDING THE BRAKING SYSTEM

Using the bleeding apparatus.

Connect the bleeding apparatus [1] on the brake fluid reservoir (4).

Adjust the apparatus pressure to 2 bars.

For each brake circuit:

- Connect a transparent tube onto the bleed screw.

- Submerge the other end of the tube in a clean container.

- Open the bleed screw.

- Wait until the fluid is flowing out without air bubbles.

- Close the bleed screw.

- Remove the bleeding apparatus.

- Check the brake fluid level (should be between «DANGER» level and «MAXI» level).

- Fill if necessary with the approved and recommended synthetic brake fluid.

Without bleeding apparatus.

NOTE: Two operators are necessary.

For each brake circuit:

- Apply the brake pedal to place the circuit under pressure.

- Connect a transparent tube onto the bleed screw.

- Submerge the other end of the tube in a clean container.

- Open the bleed screw.

- Wait until the fluid is flowing out without air bubbles.

- Close the bleed screw.

NOTE: Recommence the process a second time if that is necessary.

- Check the brake fluid level (should be between «DANGER» level and «MAXI» level).

- Fill if necessary with the approved and recommended synthetic brake fluid.

B3FP7H4D

B3FP7H5D

Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 193

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 222 223

Keine Kommentare

CITROEN C6 Technical Information Seite 199