CITROEN C6 Technical Information PDF herunterladen (Seite 68)

ENGINE

CHECKING AND SETTING THE VALVE TIMING

Engine: DT17BTED4

Remove:

- The air duct between the air/air exchanger and the air inlet housing (6).

- The air inlet housing (6).

Uncouple, plug and move aside the pipes (2) and (3) using tool [1].

Detach and move aside the electrical harness.

Remove:

- The header tank fixing (1).

- The "Swirl" electrovalve fixings (7).

Move aside:

- The "Swirl" electrovalve (7) with its support.

- The header tank (1).

Position the lifting bracket [6] at "a".

Support the engine by means of a workshop hoist.

Remove:

- The upper RH engine support tie bar, and the upper RH engine support (5).

- The engine support (4) on the chassis member.

- The accessories drive belt (8) (see corresponding operation).

- The engine support (12), the crankshaft pulley (9), the upper timing covers (11).

- The lower timing cover (10).

Line up one of the three holes "b" on the pulley with the hole on the body of the coolant pump.

Immobilise the coolant pump pulley, using tool [6].

Remove the coolant pump pulley (13).

B1BP3C2D

B1EP1JDD

Angl-C6-page022-82-2005 4/02/05 17:19 Page 62

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 222 223

Keine Kommentare

CITROEN C6 Technical Information Seite 68